Support Our Sponsors! Click On Their Banner To Visit Their Site!

Go
New
Find
Tools
Refresh Login/Join 

Discussion Topic  RE: Disgusting "hunting" show (in Campfire / The Truth) by KYODE
I seen that also I thought.....dang.....id say WAY behind the shoulder ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Campfire / The Truth

Discussion Topic  RE: Disgusting "hunting" show (in Campfire / The Truth) by Bobcat
I'm like you Bobby, I watched Pigman one time and didn't make it all the way through. I don't watch ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Campfire / The Truth

Discussion Topic  RE: Disgusting "hunting" show (in Campfire / The Truth) by scratcherky
I agree! Most of those hunting shows are pure garbage....
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Campfire / The Truth

Discussion Topic  Disgusting "hunting" show (in Campfire / The Truth) by Bobby Tomek
I have mentioned before that I don't watch much TV, but tonight, I tried watching an outdoor channel......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Campfire / The Truth

Discussion Topic  RE: WyShot 2020 ( Three weeks and counting ) (in Long Range Handgunning) by Hoggin
With the forum being very close to dead I believe the majority of the talk has been direct with Erni......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Long Range Handgunning

Discussion Topic  WyShot 2020 ( Three weeks and counting ) (in Long Range Handgunning) by Arrowflinger
Hey all. I know these are different times. But it is very strange to see so little talk about a sho......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Long Range Handgunning

Discussion Topic  RE: New old Encore (in SINGLE SHOT Carbines, Rifles & Shotguns) by jsh
I would be interested in true values of what the 6CM has over the old 243. Support for the CM line ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: New old Encore (in SINGLE SHOT Carbines, Rifles & Shotguns) by Magnum Mike
Heck yea, the 6 creed is good out to beyond 1300. With some of the newer match bullets, you can ge......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  New old Encore (in SINGLE SHOT Carbines, Rifles & Shotguns) by rickt301
Picked up an early Encore made in 1998 the other day. The barrel on it is a 270 and the guy I bought......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Setting up a handgun scope (in Break Action Pistols) by Magnum Mike
With that Leupold, you can pretty much run it as far forward on the base as you can, unless you're......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  Setting up a handgun scope (in Break Action Pistols) by allen york
My barrel is almost done. Now the question is how do I set up my scope. It is going on a encore hand......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: Laminated wood stock Xp-100 (in Bolt Action, Falling Block & Rotary Breech Pistols) by Gator T/C
I have a post that describes Remington action differences. Brad...
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Laminated wood stock Xp-100 (in Bolt Action, Falling Block & Rotary Breech Pistols) by bowhntr/convert
Now am I correct but isnt the model 7 action smaller than the 700 ?...
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Laminated wood stock Xp-100 (in Bolt Action, Falling Block & Rotary Breech Pistols) by Gator T/C
The trigger from a xp-100 works just fine in the Model 7, the short action and the long action. You ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Laminated wood stock Xp-100 (in Bolt Action, Falling Block & Rotary Breech Pistols) by bowhntr/convert
I like the idea of a Remington 700 action center grip pistol but where do you get trigger assembly t......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by KYODE
Trying a different bullet may help some. Im sure those are nice quality bullets and would be good on......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by HotRodAl
......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by Archer357
Thanks everyone for the info. When locked up, I get side to side movement with my 300 mag barrel an......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by KYODE
Id try some H1000 powder.....and do the muzzle brake. Only way id do an oversize pin, is if it would......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by Magnum Mike
I'll second Al's comments regarding oversize hinge pins. I've been shooting contenders since I turne......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by LoneStar
We really need more information from the OP to be able to intelligently diagnose his problem. Fir......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by Mike Scott
A Contender shooting 4 MOA has bigger problems than a "loose" pin. The oversize pins are a slip i......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by PotatoJudge
HotRodAl, thanks for that post. I have the Contender in 357 Max, correspondence, and original printi......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by HotRodAl
You need to think twice before driving an oversize pin through that frame, I personally know of one ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by 444Thumper
Are you getting the side to side movement when the action is closed or when open? If it is when clo......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by sisko
You need to get a Bellm oversized hinge pin. I have one in all my Encore and Contender frames. ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  Encore barrel movement (in SINGLE SHOT Carbines, Rifles & Shotguns) by Archer357
Hi everyone, I have an encore, trying to work up a load for my 300 win mag barrel. Having trouble, t......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Finally! 30 NOS RC gonna happen! (in Bolt Action, Falling Block & Rotary Breech Pistols) by rickiesrevenge
The 210 is a great choice. Good luck on your build! Aaron...
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Finally! 30 NOS RC gonna happen! (in Bolt Action, Falling Block & Rotary Breech Pistols) by Rog (Buttermilk421)
Reamer specs were put into place with the Berger 210 VLD in mind. I used the bullet dimension provid......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Finally! 30 NOS RC gonna happen! (in Bolt Action, Falling Block & Rotary Breech Pistols) by rickiesrevenge
I don't think it'll be too heavy. What bullet are you planning on using? Aaron...
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Finally! 30 NOS RC gonna happen! (in Bolt Action, Falling Block & Rotary Breech Pistols) by Rog (Buttermilk421)
Thanks fellows. I’m anxious to get this one done. I hope it shoots as good as the other XP-100 and......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Finally! 30 NOS RC gonna happen! (in Bolt Action, Falling Block & Rotary Breech Pistols) by Pa. Mike
Divorce , been there done that , painful but sometimes better for both parties involved. Glad your b......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Finally! 30 NOS RC gonna happen! (in Bolt Action, Falling Block & Rotary Breech Pistols) by Ramon
Good luck with it. Sounds like fun. Yes divorce is no laughing matter....
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: new toy...with picture (in SINGLE SHOT Carbines, Rifles & Shotguns) by Steve E
Duh, I just realized it is stocked backwards, you and my Wife both shoot backwards Bobby. Looks like......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Threading Contender Barrels (in Break Action Pistols) by Joseph Clark
Thanks for the replies. Truing a temporary sleeve is something I would not have thought of. I'll t......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: Threading Contender Barrels (in Break Action Pistols) by ssphogger
I have used lathe dogs and had much sucess with them....
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: Threading Contender Barrels (in Break Action Pistols) by Hoggin
Like any other lathe work. As long as you dial in the point in which you are cutting you will be fin......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: Rear Tang Swivel on McMillian Stock. (in Bolt Action, Falling Block & Rotary Breech Pistols) by Nitemann
I've never used a sling to carry my XP so see no need to have one. Has always been awkward to me. Th......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: Rear Tang Swivel on McMillian Stock. (in Bolt Action, Falling Block & Rotary Breech Pistols) by rickiesrevenge
I've always wondered why people put them in the bottom of the grip. I rest my guns on the grip so I......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  Rear Tang Swivel on McMillian Stock. (in Bolt Action, Falling Block & Rotary Breech Pistols) by Pa. Mike
I have seen several pictures of McMillian XP stocks that had the rear sling swivel stud located on t......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Bolt Action, Falling Block & Rotary Breech Pistols

Discussion Topic  RE: All things Contender (in Break Action Pistols) by bowhntr/convert
Might consider Win 296 or H110 which are the same powder but my Max liked it better than 4227 ! And ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: 25-45 Sharps in Contender (in Break Action Pistols) by J A
......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: 25-45 Sharps in Contender (in Break Action Pistols) by MClark
Made a 20" Contender for the Boss and For myself a Remington 700 24". I have been using the Hornady......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: 25-45 Sharps in Contender (in Break Action Pistols) by J A
Just got off the phone with Jerry Choate of Jerry's Outdoors in Tulsa who has had a 25-45 Sharps Con......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Break Action Pistols

Discussion Topic  RE: What's your longest-owned Contender barrel? (in SINGLE SHOT Carbines, Rifles & Shotguns) by Kylongrifle
I purchased my first Contender 14" 44 mag in 1987 just after getting out of the military. It was use......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > SINGLE SHOT Carbines, Rifles & Shotguns

Discussion Topic  RE: Annealing methods (in Reloading Information, Data & Equipment) by Jay HHI6818
For many years I annealed my brass using a piece of wooden dowel close to primer pocket size. I sand......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Reloading Information, Data & Equipment

Discussion Topic  RE: Annealing methods (in Reloading Information, Data & Equipment) by lak
Pop the primer out of the case. Use a metal cooking pan that is about 1.5" deep. Put in about 1/2"......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Reloading Information, Data & Equipment

Discussion Topic  RE: Having more fun with AR10 pistol (in Semi-Auto Pistols) by big10
Nice piece! I built an AR-9 with Ballistic Advantage 8.3" barrel and Kak can inside a 10" rail. I ......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Semi-Auto Pistols

Discussion Topic  Having more fun with AR10 pistol (in Semi-Auto Pistols) by HotRodAl
This is one I've had for a bit over 4 years now, I built it from an Aero upper and lower, it has a 1......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Semi-Auto Pistols

Discussion Topic  RE: base and ring recommendations (in Optics & All The Other Gear) by lak
Encore Weaver Stainless Steel Scope Base, by MGM barrels. With Burris signature rings. Base is on s......
CLICK HERE for Subscriptions > Specialty Pistols > Specialty Pistols Forums > Optics & All The Other Gear


» Refine Search
» New Search

  Powered by Social Strata  Next ›  


© Specialty Pistols 2003 - 2019 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.