Support Our Sponsors! Click On Their Banner To Visit Their Site!

Go
New
Find
Notify
Tools
Reply
  
Knives of alaska question
 Login/Join 
700varmint

Picture of 700varmint
posted
I have a KOA alaska skinner that i would like the blade hollow ground, where can i get this done?


------------------------------
"IF you really think about it, we are all one bullet away from being in charge" GySgt A.R. Goulding USMC
VHA Memeber # 69590
 
Posts: 1347 | Location: Pennsylvania | Registered: January 26, 2006Reply With QuoteReport This Post
tinkerer

posted Hide Post
May I suggest you just pick up another knife as regrinding a finished blade can be catastrophic.

Larry
Tinkerer
 
Posts: 1259 | Location: Dallas, TX | Registered: November 09, 2008Reply With QuoteReport This Post
MK 19

posted Hide Post
As Tink stated, you do not want to re-grind a finished blade, it will destroy the heat treating and hardness, you can find a really nice unfinished blade for a decent price and have that worked over the way you want.
 
Posts: 1162 | Location: California | Registered: November 03, 2012Reply With QuoteReport This Post
Timgunner

posted Hide Post
If the reason you want the edge re-ground is because the knife is dull or chipped send it in to KOA and they will do it for free. I chipped the blade on my camp knife and sent it in. They sent me a new knife and $10 to pay for my shipping! I will be buying from them exclusively from now on.
 
Posts: 29 | Location: Black Hills South Dakota  | Registered: March 28, 2017Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.