Anyone out there have any loads for 270 Maximum? Parent case is 357 Maximum. I picked up a RPM pistol with a barrel for this caliber. Bullets in the 110-130g category, 10 inch barrel.
I used to have a XL with a 270 Max barrel but I sold it to JonPol early last year, unfortunately I never did anything with that barrel so I do not have any information. Jonpol may have done work with that barrel so he may have the information you need. Another choice would be the contact RPM at RPMXL1.com, Jim Rock passed away a couple years ago but his son should be able to help you out.
Thanks for the advice on contacting RPM. I ran the cartridge through my NECO QL program and came up with some starting loads. Just wondering what any one else had tried.
my silhouette load is 22.5 gr h-322 with the hornady 130 spire point. my gun is a bf and it will not stabilize a 150 gr bullet. allen
L Cazador........ if you need any 270 Max brass, I have some. My email is listed in my profile.
Allen, any idea what the H322 load velocity is and what length barrel? Dant I sent you an e-mail on the 270 brass.
around 1750 fps. going to try 23 grains if I ever get a day off work. barrel length is 10.5" allen
Anybody have any 279 max brass
Thats 270 max brass not 279
I realize this is an old post, However I have Jim Rocks 270 Max loading recipe and dies for the 270 max, from Jim, What I do not have is the dies to neck down the 357 maximum case to accept the 270 tip. If your still interested you can e-mail me at firstname.lastname@example.org and please put 270 Max in the subject line so it will catch my attention. Thanks Dave
E-mail sent. Thanks Allen
|Powered by Social Strata|