Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
SSP Exploded Diagram Login/Join 



Picture of Knucklehead 61
posted
Does anyone have an exploded diagram or disassembly drawing for the SSP / Lone Eagle they are willing to share?
I've got an SSP-91 that needs the breech disassembled for cleaning and I'm uncomfortable doing it with no guide.
I do have a drawing / manual in pdf for the Competitor if any one needs one.
Thanks.
Smile
 
Posts: 89 | Location: south of the piney woods | Registered: December 22, 2017Reply With QuoteReport This Post


030423



Picture of Sawfish
posted Hide Post
What is your email address?


------------------------------
Good Shooting Makes Good Hunting
NRA Patron Member, FTRA Member;
Life Member SCI, NAHH, RMEF, and NSRPA; HHI Member #7108, Member CBA, NSSF

"A man can never have too much red wine, too many good books, or too much ammunition."
Rudyard Kipling
 
Posts: 3508 | Location: Peoples Republic of Kalifornia | Registered: March 13, 2006Reply With QuoteReport This Post



Picture of Knucklehead 61
posted Hide Post
It's in my public profile.
Smile
 
Posts: 89 | Location: south of the piney woods | Registered: December 22, 2017Reply With QuoteReport This Post


030423



Picture of Sawfish
posted Hide Post
Sent five minutes ago.


------------------------------
Good Shooting Makes Good Hunting
NRA Patron Member, FTRA Member;
Life Member SCI, NAHH, RMEF, and NSRPA; HHI Member #7108, Member CBA, NSSF

"A man can never have too much red wine, too many good books, or too much ammunition."
Rudyard Kipling
 
Posts: 3508 | Location: Peoples Republic of Kalifornia | Registered: March 13, 2006Reply With QuoteReport This Post



Picture of Knucklehead 61
posted Hide Post
Thanks Sawfish.
If you happen to need a Competitor diagram, I have that. These SSP / Lone Wolf drawings are scarce.
 
Posts: 89 | Location: south of the piney woods | Registered: December 22, 2017Reply With QuoteReport This Post


030423



Picture of Sawfish
posted Hide Post
Mine came with the pistol many ears ago. At one time you could request them from the factory, but that practice was discontinued some years ago. I hope these solved your problem.


------------------------------
Good Shooting Makes Good Hunting
NRA Patron Member, FTRA Member;
Life Member SCI, NAHH, RMEF, and NSRPA; HHI Member #7108, Member CBA, NSSF

"A man can never have too much red wine, too many good books, or too much ammunition."
Rudyard Kipling
 
Posts: 3508 | Location: Peoples Republic of Kalifornia | Registered: March 13, 2006Reply With QuoteReport This Post



Picture of Knucklehead 61
posted Hide Post
Yes, that resolved my problem.
The last time I contacted Magnum Research some years ago, they would hardly admit to selling the Lone Eagle and had no parts or support available. I bought my first one new and the manual was 'basic' with no internal drawings, etc. I've owned several and my latest seems to have had powder spilled in the action requiring a full strip down, something I wouldn't attempt without without a guide.
Thanks again.
 
Posts: 89 | Location: south of the piney woods | Registered: December 22, 2017Reply With QuoteReport This Post


030423



Picture of Sawfish
posted Hide Post
Glad to be of assistance.


------------------------------
Good Shooting Makes Good Hunting
NRA Patron Member, FTRA Member;
Life Member SCI, NAHH, RMEF, and NSRPA; HHI Member #7108, Member CBA, NSSF

"A man can never have too much red wine, too many good books, or too much ammunition."
Rudyard Kipling
 
Posts: 3508 | Location: Peoples Republic of Kalifornia | Registered: March 13, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.