Support Our Sponsors! Click On Their Banner To Visit Their Site!

Moderators: nmhunter
XP 100 action wrench Login/Join 

Anyone know of a gunsmith in Houston that can remove a barrel off an XP 100?
There is a shortage of full service smiths here. I`m having trouble finding someone local with the correct tool. We have a master smith here, and he has many wrenches. But not one that fits my action. He didn`t want to risk damaging my action. It`s a 1980`s model. Although I thought they were all the same. And I thought it was just a model 600.

Thanks for any suggestions you might have.
Posts: 2 | Location: Texas | Registered: June 11, 2018Reply With QuoteReport This Post

Picture of Hoggin
posted Hide Post
An action wrench that fits a Remington 700 will work just fine
Posts: 4007 | Location: Newcastle, WY | Registered: January 24, 2011Reply With QuoteReport This Post
  Powered by Social Strata  

© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.