Specialty Pistols
Finally! 30 NOS RC gonna happen!

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/8220025796

May 21, 2020, 11:52 PM
Rog (Buttermilk421)
Finally! 30 NOS RC gonna happen!
It’s about time!!!

After a long period of time that seemed like an eternity, I’m finally in the wait stage for a 30 Nosler build.

I think it was about 3 years ago when I started collecting parts for a custom build. It may have been four years ago. The memory is a blur. A life status change had a huge impact on my ability to finish what I started. I hate divorce, and the agony it brings. Not to mention the cost, financially and emotionally/psychologically.

Seems the first piece I bought was the barrel, which came from bugholes.com if I remember right. I think that was four years ago or so. If I had the invoice handy I’d look and see.

Slowly, I managed to collect brass, dies, another XP-100, scope base, scope and a stock. Today, I loaded all the pieces in my truck and made the trek to my gunsmith, Jon Beanland of Beanland Custom Rifles in Gould, Oklahoma, four hours away.

This will be the third gun Jon has built for me.

Here’s what the spec’s are:

+Bartlein Hvy Palma contour 1:9”, 5R barrel (going with 18” or 18.5” length)
+Muzzle Brakes and More Beast 1” 5-port brake, 3/4”x24
+Action will be trued
+Bolt face opened up and M-16 extractor installed
+External Bolt stop installed (Defiance is planned)
+Ken Farrel 20 MOA picatinny scope base
+McMillan Alpine Ambush stock
+Scope initially will be a Burris 3x-12x and at a later date, changed out with some better glass
+JGS Custom reamer spec’d to my dimensions on neck diameter, throat diameter, and freebore length
+ADG brass waiting to get plugged with primer, powder and bullet, and will also try some Hornady brass just because.
+Titanium Cerakote finish


Now, I’m waiting. Patiently.

This message has been edited. Last edited by: Rog (Buttermilk421),


Regards,
Rog (Buttermilk421)


May 22, 2020, 12:12 AM
junebug
Sweet, now you have something to look forward to. Sometimes life gets in the way and changes plans. Hang in there! thumbup
May 22, 2020, 10:44 AM
Ernie
Sounds Awesome!


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 22, 2020, 06:48 PM
Ramon
Good luck with it. Sounds like fun. Yes divorce is no laughing matter.
May 22, 2020, 08:19 PM
Pa. Mike
Divorce , been there done that , painful but sometimes better for both parties involved. Glad your build is moving along. I am anxious to see and read about the finished product!
May 22, 2020, 11:27 PM
Rog (Buttermilk421)
Thanks fellows. I’m anxious to get this one done.

I hope it shoots as good as the other XP-100 and rifle Jon built for me. If it does I’ll be extremely happy. Icing on the cake will be if I hit my velocity goals.

This thing will weigh half a ton with that Bartlein Heavy Palma tomato stake hanging off the front end. Probably be the last heavy one I have built. Well, after the next heavy one any way (already thinking, and talking with Jon Beanland about doing a smokeless muzzle Loader on my third XP-100... Wink )


Regards,
Rog (Buttermilk421)


May 23, 2020, 06:56 PM
rickiesrevenge
I don't think it'll be too heavy. What bullet are you planning on using?

Aaron
May 23, 2020, 11:18 PM
Rog (Buttermilk421)
Reamer specs were put into place with the Berger 210 VLD in mind. I used the bullet dimension provided by Berger to set the base of the B210VLD bearing surface at neck/shoulder junction of the brass and the bullet to just touch the lands. It will also be a good freebore for the Berger 215, and will/should work with some longer bullets as well.

I really only plan on using 200-215 grain bullets.


Regards,
Rog (Buttermilk421)


May 24, 2020, 11:55 AM
rickiesrevenge
The 210 is a great choice. Good luck on your build!

Aaron