Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
Savage Striker BBl. threads & bolt spacing ?? Login/Join 



posted
Like the title says, what are the threads on a Striker Bbl. ? OR more to the point, are the threads in a Striker action, the same as "standard or small shank Savage rifle barrels ?
Also, what are the mounting screw spacing ? 4.275" or 4.411"

This message has been edited. Last edited by: Wayne S,


------------------------------
IHMSA # 566, Time sure flys when you're having fun
 
Posts: 1857 | Location: Bagdad [no H] Fla | Registered: October 19, 2008Reply With QuoteReport This Post


030423



Picture of Sawfish
posted Hide Post
The threads on the Striker are the same as on the Savage rifle actions. Mounting screw holes on the Striker are the same as the Savage short action rifles of the same configuration. The actual Striker actions are "pre Accu-Trigger" and have the flat top rear bridge.


------------------------------
Good Shooting Makes Good Hunting
NRA Patron Member, FTRA Member;
Life Member SCI, NAHH, RMEF, and NSRPA; HHI Member #7108, Member CBA, NSSF

"A man can never have too much red wine, too many good books, or too much ammunition."
Rudyard Kipling
 
Posts: 3510 | Location: Peoples Republic of Kalifornia | Registered: March 13, 2006Reply With QuoteReport This Post



posted Hide Post
Thank you, found out it's 4.411"

This message has been edited. Last edited by: Wayne S,


------------------------------
IHMSA # 566, Time sure flys when you're having fun
 
Posts: 1857 | Location: Bagdad [no H] Fla | Registered: October 19, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.