Specialty Pistols
xp100 bolt question

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/7720098096

April 16, 2018, 11:22 PM
sharkyf9
xp100 bolt question
.Thinking of making a Remage out of my 221 FB.I would like to have a 223-use my 221 bolt.Also would like to have a 6br and maybe a 300 WSM.I have a 243 REM 600 and a 350 Rem.600.Any reason not to use the bolts out of them for my XP100-centergrip and if I wanted to shoot the rifles,put the bolts back in them?I know the remage would have to be headspaced on barrel change,but the rifles headspace should not change.Any thoughts? Also,on pinning the recoil lug-does this make the lug permanant-or maybe easier to change barrels? Thanks for any advice
April 17, 2018, 07:56 AM
rickiesrevenge
I like to pin the lugs on switch barrels. The lug isn't permanently attached but it'll stay in alignment so you don't need to worry about it fitting the bedding. I've put bolts in different rigs before with no issues.

Aaron
April 19, 2018, 08:32 AM
Cappi
So to be clear, yes you can take a bolt out of a Rem. 600 and install in an xp-100
Then its a matter of head spacing the barrel to the bolt ??
April 19, 2018, 06:22 PM
rickiesrevenge
My understanding is that the xp is based on the 600. I've never done it with a 600 bolt. Just model 7 bolts.

Aaron