Specialty Pistols
Muzzle Brake Adhesive

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/7370037896

October 27, 2020, 08:06 AM
K9TXS
Muzzle Brake Adhesive
Anyone using red Loctite or Rocksett on the threads to keep the brake in place?
October 27, 2020, 08:19 AM
PopcornSutton
I have never seen or heard of anyone using any type of thread locker on a brake. They are generally removed to clean the barrel, so why lock it down? If it is correctly installed, it should never loosen by firing.
October 27, 2020, 08:54 AM
Nitemann
I've had a few that work loose. I use the blue Loctite with no issues on those. It shouldn't require/need anymore than that.

Rick
October 27, 2020, 10:13 AM
rickiesrevenge
Yes. I use rocksett on the ones that are also suppressor mounts. If you don't it'll spin off with the can if you tried to take it off while warm. I think whats happening is the different metals expand at different rates locking the can to the brake.

Aaron
October 27, 2020, 11:10 AM
K9TXS
quote:
Originally posted by rickiesrevenge:
Yes. I use rocksett on the ones that are also suppressor mounts. If you don't it'll spin off with the can if you tried to take it off while warm. I think whats happening is the different metals expand at different rates locking the can to the brake.

Aaron


From what I've read, the rocksett really sets up hard and makes it very difficult to remove if needed.

Have you ever tried to remove the attachment after using the rocksett?
October 27, 2020, 11:13 AM
Arrowflinger
I use blue Loctite on all of mine.
-Derek
October 27, 2020, 01:41 PM
Hoggin
I use red. Just takes some heat to get it off
October 27, 2020, 05:44 PM
rickiesrevenge
I haven't, but you put the part in boiling water and it comes right off. At least according to friends who use the same.
October 28, 2020, 07:03 PM
LoneStar
The manufacturer states that the only way to remove a part is to soak it in hot water. Heat alone won’t work.



.


.

“The 30-06 is the world's most over-rated big game cartridge" - Elmer Keith
October 29, 2020, 05:21 AM
Predator_huntin
I used blue locktite and a jam nut on my JP Eliminator on a 308 encore barrel...not sure if it needed the locktite but I figured why not.


Chris
October 29, 2020, 01:48 PM
old leghumper
I never had a muzzle brake loosen up. I made sure there was a tight fit between both sets of threads. I also used molybendium grease so the threads would not sieze...Not rocket science, just careful machining.


----------------------
Never argue with an idiot: they will drag you down to their level and beat you with experience!
I am that idiot.
October 29, 2020, 02:10 PM
Gator T/C
I have had a few of the more effective brakes loosen up. Most recently on my 300 Win mag with a self timing brake. It was a fairly thin barrel so I used 9/16-28 threads and I had good class III threads but it still loosened on me twice so I used Blue Loctite and have not had the issue repeat.

Brad


------------------------------
Contender 22LR, 17MachII, 17HMR, .223(SSK), 6mm Gator, 6TCU, 6mmJDJ(Van Horn), 25x47(Coyote), 6.5 JDJ(SSK), 7x47(SSK),308 Bellm, .338 SSK Woodswalker (2),358 Bellm, 375Win, 375 JDJ(SSK), 45/70(SSK), 45/70 (VanHorn), 50-70(SSK)
Encore .243, 7mm–08, 300WM(15-1/4"), 50-90(MGM, 14"), 50–110 (MGM), .50ML(16")
XP-100 .223, .223AI, 6mm204Imp, .243AI, 6BR
XP-7 .223,.243,.300Blackout, .300RSAUM
XP-700SA .22LR, .243
XP-700LA .25/06, .270AI, .300WM,.338 Lapua, .510 Whisper
October 29, 2020, 03:28 PM
Knucklehead 61
Haven't needed thread locker on a brake [yet]. I'd use blue Locktite, if necessary and up the game to red or such if that didn't do the job. No need to make extra work for yourself.