Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
McMillan Stock ?
 Login/Join 
Nitemann

0716223

Picture of Nitemann
posted
I picked up a early model McMillan stock for my XP-100 and have a question. Did earlier McMillan stocks have the metal plate to drill and tap for the rear screw? I know they get covered by the fiberglass or what ever it is but wanted to be sure before attempting to drill it.

 
Posts: 3523 | Location: Mesa, Arizona | Registered: January 18, 2004Reply With QuoteReport This Post
Nitemann

0716223

Picture of Nitemann
posted Hide Post
2nd pic

 
Posts: 3523 | Location: Mesa, Arizona | Registered: January 18, 2004Reply With QuoteReport This Post
rickiesrevenge

posted Hide Post
Whats your plan if there isn't a chunk of aluminum in there?

Aaron
 
Posts: 2752 | Location: AK | Registered: March 13, 2011Reply With QuoteReport This Post
Nitemann

0716223

Picture of Nitemann
posted Hide Post
Aaron I drilled a small hole just to check and it does have metal. If not I was going to Dremel a recess and epoxy a T-nut in place.
 
Posts: 3523 | Location: Mesa, Arizona | Registered: January 18, 2004Reply With QuoteReport This Post
Hoggin

Picture of Hoggin
posted Hide Post
quote:
Originally posted by Nitemann:
I picked up a early model McMillan stock for my XP-100 and have a question. Did earlier McMillan stocks have the metal plate to drill and tap for the rear screw? I know they get covered by the fiberglass or what ever it is but wanted to be sure before attempting to drill it.


Yup it has a block in them. If it fails I just cut out a section and bed in another block.
 
Posts: 4007 | Location: Newcastle, WY | Registered: January 24, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.