January 16, 2021, 10:19 AM
NitemannMcMillan Stock ?
I picked up a early model McMillan stock for my XP-100 and have a question. Did earlier McMillan stocks have the metal plate to drill and tap for the rear screw? I know they get covered by the fiberglass or what ever it is but wanted to be sure before attempting to drill it.
January 16, 2021, 10:20 AM
Nitemann2nd pic
January 25, 2021, 12:17 AM
rickiesrevengeWhats your plan if there isn't a chunk of aluminum in there?
Aaron
January 25, 2021, 01:30 PM
NitemannAaron I drilled a small hole just to check and it does have metal. If not I was going to Dremel a recess and epoxy a T-nut in place.
January 25, 2021, 01:34 PM
Hogginquote:
Originally posted by Nitemann:
I picked up a early model McMillan stock for my XP-100 and have a question. Did earlier McMillan stocks have the metal plate to drill and tap for the rear screw? I know they get covered by the fiberglass or what ever it is but wanted to be sure before attempting to drill it.
Yup it has a block in them. If it fails I just cut out a section and bed in another block.