Specialty Pistols
Striker Stock

This topic can be found at:

June 10, 2016, 08:33 PM
280 AI
Striker Stock
I just got a Striker in 270 wsm nice gun but stock is not very good . I saw 7 Fingers makes one what others could be available . I would like to change to rear grip with benchrest forend . Thanks Jason
June 11, 2016, 12:57 PM
Hi Jason,
I have one on the way from Accurate Rifle Systems. They have an add at the top of this sight. Joe is a great guy and I have had a couple long conversations with him. I will post a picture as well a review when it arrives.
I wasn't happy with the stock on my 6mm Br. I bought it from a member and it had extensive changes made to it. I like you wanted to change to a rear trigger.
On that end. I would like any suggestions that might be out there on the best trigger for this project. I want one that can be set to one lb or less.
June 11, 2016, 01:09 PM
280 AI
I would like to see pictures ! I like Rifle Basix for the money but you will have to keep it in adjustment I use lighter fluid for lube without gumming . Thank You
June 17, 2016, 09:17 PM
SSS triggers are great. I don't care for the rifle basics.
June 19, 2016, 08:01 PM
I have a question. I am building a 6.5 creedmoor on a savage target action. I have a neck issue that doesn't allow me to shoot high power rifles with recoil above a .223 level from the shoulder anymore so I have converted to a pistol. My question is for general target shooting why does one choose a larger "superior" cartridge over say a .223 running an 80 grain amax pushing 2800 fps plus with a b.c of .455!? This projectile stays supersonic to around 1200 yards at 1100 feet above see level. It only has 2" more drift than a 308 running 178 amax, and it has much less drop. So why is it overlooked so much?
June 19, 2016, 09:38 PM
280 AI
I dont know that you will get that much velocity out of pistol with that 80 gr . The creedmoor will be a good choice , just got back from moa shoot there were several 260 rem there! Get a goo brake and you will enjoy it !
June 19, 2016, 10:53 PM