Specialty Pistols Specialty Pistols Forums Bolt Action, Falling Block & Rotary Breech Pistols Xp 100 rechamberGo | New | Find | Notify | Tools | Reply | |
| Xp 100 rechamber | Login/Join |
 072922  |
I have a xp100 with a bond fluted heavy barrel in 7br. Thinking of rechambering it. First is it worth doing, second what would my caliber choices. Thanks j | ||
|
| 0716223   |
Depending on how heavy and barrel length you could easily do a 7-08, 284, 7 saum, 7 wsm, etc. You'll need to open the bolt on a few of these but no big deal. It all depends on how much more you wanting over the 7mm BR. Rick | |||
|
 LIFE  |
Back when Remington came out with the XP in 7BR, many was rechambered to 7mm International or 7-08 through IHMSA. Glenn ------------------------------ “Evil, unchecked, is the prelude to genocide. - Anonymous” ― Joel C. Rosenberg, The Auschwitz Escape | |||
|
  |
7-08 is prob the easiest one | |||
|
 |
A little more info would help with suggestions  What is the end use going to be? Do you know what twist the barrel is? And what is the round count and bore condition of the barrel? All of the Bond XP's in 7BR I've seen had a fast enough twist to stabilize at least 168 Gr bullets. The 7 BR is usually pretty easy on barrels as long as they were cared for. If you are planning on running a rifle scope on it, you'll want to put a brake on it too. I'd have a smith scope the bore first before I went any farther with it. Why spend your $$$ to rechamber a worn out barrel?  -Mike | |||
|
|
Good points! But to add some positive to the post  the throats is normally the first thing to go if the barrel is worn. All of the rechambers your looking at should cut that out. And always do a new crown. A brake....who doesn't use those.  | |||
|
072922 |
Bore is good, unknown twist. Barrel is already threaded and fluted. What is a normal cost to rechamber a xp and install a owner supplied brake. I'm thinking 7mm08. J. | |||
|
 030423  |
You could also go with the .284 Winchester, which will not require modification of the bolt face.. I would expect to pay $100-$120 for a quality rechambering job. ------------------------------ Good Shooting Makes Good Hunting NRA Patron Member, FTRA Member; Life Member SCI, NAHH, RMEF, and NSRPA; HHI Member #7108, Member CBA, NSSF "A man can never have too much red wine, too many good books, or too much ammunition." Rudyard Kipling | |||
|
|
think ACKLEY as long as your doing it. brass life and bit of speed. | |||
|
072922 |
| |||
|
 |
284 Shehane? | |||
|
| 0716223 |
The barrel contour at the chamber area on this particular XP won't allow a rechamber to the bigger/longer calibers. It now resides in AZ where it will happily remain a 7BR. Rick | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
