Specialty Pistols
New striker owner

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/5940085196

June 11, 2018, 12:35 PM
Crs89
New striker owner
Just bought a striker in 300wsm with a new shilen stainless steel barrel. It's getting shipped today. Is there anything I should check when I get it and what's the normal cost of a aftermarket wood stock?
June 11, 2018, 02:29 PM
tinkerer
Usually the trigger needs adjustment.

You can upgrade the trigger with a modified Rifle Basix unit.

As far as aftermarket wood stocks for mid grip, None. Convert to rear grip, use Model 10 rifle stocks.

I have been known to make some mid grip occasionally. I also upgrade the plastic stock for better fit and enhanced function.

Email me for some pics of what's available and possible.

Larry
Tinkerer
June 11, 2018, 02:48 PM
Freeze
quote:
Originally posted by tinkerer:


... I also upgrade the plastic stock for better fit and enhanced function.

Larry
Tinkerer


I have a mid-grip that Tinkerer modified and it is a huge improvement to the factory mig-grip ergonomics.

If you stay mid-grip I would strongly suggest you at least give his modification a look.

-Freeze
June 11, 2018, 05:44 PM
big10
If you don't have large hands you will likely want to wittle on the handle a bit. I took a lot of material off mine along with grinding finger grooves into it. It made a world of difference.


thumbup Rod
------------------------------
It's not a break, it's a brake, unless it's a break, then it's broke ;-)