Specialty Pistols
Striker 22-250 twist?

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/4420031386

June 04, 2016, 04:56 AM
joeb33050
Striker 22-250 twist?
Does anyone KNOW the twist on a 22-250 Striker? 1st gen.
I keep measuring and getting ~ 1:12, but I think it's slower.
Thanks;
joe b.
June 05, 2016, 10:48 AM
Nitemann
If it's a factory barrel it's most likely 1-12" and as you state you keep measuring and get 1-12".

Rick
June 05, 2016, 11:01 AM
big10
12 sounds right to me.


thumbup Rod
------------------------------
It's not a break, it's a brake, unless it's a break, then it's broke ;-)
June 08, 2016, 10:59 AM
joeb33050
Does anyone KNOW?
June 08, 2016, 11:49 AM
big10
quote:
Originally posted by joeb33050:
Does anyone KNOW?


Well you have the barrel. If you were closer I'd be happy to come measure it for you Wink


thumbup Rod
------------------------------
It's not a break, it's a brake, unless it's a break, then it's broke ;-)
June 09, 2016, 10:25 PM
paperpuncher
My striker is a 1:14 according to the savage booklet that came with it.....just not sure what gen mine is or how to tell.

Scott
June 10, 2016, 07:58 PM
joeb33050
Thank you for the 14" twist mentiion in your manual.
The Striker has a 14" long barrel, and with the chamber, it is difficult to measure the twist. My M10 barrels measure 12" twist and stabilize a .89" long cast bullet. The Striker will NOT stabilize that bullet. I thought the Striker twist was slower than 12" even with my difficult/fuzzy measurements.
Your response clears this up.
Would you send me a copy of the page from your manual, I don't have a manual.
Thanks a ot;
joe b.
June 10, 2016, 10:21 PM
paperpuncher
Yes I can get you a copy this weekend.....

Scott
June 11, 2016, 07:01 PM
paperpuncher
here is the page....hope it helps

This message has been edited. Last edited by: paperpuncher,