Support Our Sponsors! Click On Their Banner To Visit Their Site!

Moderators: nmhunter
striker 510 308 muzzle break question Login/Join 

Is the barrel on a 308 striker 510 too thin to have threaded for a muzzle break?
Posts: 4 | Location: Komifornia | Registered: December 30, 2015Reply With QuoteReport This Post

Picture of Leupold Man
posted Hide Post
Welcome to Sp Mtnman. Contact Hoggin here on this site. The man can do amazing work. I am sure he can help you.

Veteran and NRA Life Member
Posts: 2724 | Location: Waterloo Wisconsin | Registered: October 22, 2014Reply With QuoteReport This Post

Picture of big10
posted Hide Post
A brake shouldn't be a problem, they make them with threads as small as 1/2".

thumbup Rod
It's not a break, it's a brake, unless it's a break, then it's broke ;-)
Posts: 6522 | Location: Northern MN | Registered: February 17, 2006Reply With QuoteReport This Post

posted Hide Post
factory barrels were 9/16 but an odd pitch
Posts: 2086 | Location: Kasson MN | Registered: August 20, 2006Reply With QuoteReport This Post

Picture of bowstryder
posted Hide Post
You can get a muzzle brake fitted to just about anything. The problem is the smaller the barrel the fewer options are available.
Posts: 445 | Location: waynesboro, va | Registered: January 05, 2013Reply With QuoteReport This Post
  Powered by Social Strata  

© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.