Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
New Striker stock Login/Join 



posted
I'm working on about 5 at this time, but this one is done.

Ladies and gentlemen, the new faux carbon fiber benchrest stock striker.



Others in progress are a laminated hunter, a modded Striker stock in predator camo, a NICE maple with ebony tips, and another modded Striker with panzer camo, and one so wierd, I'm not even going to talk about it yet.

Larry
Tinkerer
 
Posts: 1259 | Location: Dallas, TX | Registered: November 09, 2008Reply With QuoteReport This Post



posted Hide Post
I like it. Nice work as usual.

Bruce
 
Posts: 1087 | Location: Georgia | Registered: September 19, 2008Reply With QuoteReport This Post



posted Hide Post
Larry that's really nice! You gotta tell us more about it please.

Jon
 
Posts: 1601 | Location: East Central Iowa | Registered: December 29, 2003Reply With QuoteReport This Post



posted Hide Post
OK, started life as a OEM stock.

First, I cut off the bottom of the foreend and added a piece of 3 1/2" wide birch plywood. Screwed and epoxied in place. Very stiff and sealed.

Used wood epoxy putty and blended in.

Took both the belt sander and the dremel sander and ground away for great finger grooves and a little thumb shelf.

Sealed it with epoxy black satin paint and sanded until smooth. Many coats of satin black.

Technique calls for using some Wally World rubber perforated shelf liner. Tape as flat as you can. Spray base coat of graphite gray. Let dry and come back with some silver for highligts. Remove, mask and move one.

Saw how on youtube. I understand there is a hydrographics dip kit. Don't know.

Do to all the curves, you get some better coats than others. Gives it that shimmer look.

Get all done and coat with gloss clear, about 4 times for a real gloss final.

Look for it in a future pistol pack with 2 stock (this one and a custom maple with ebony tips), 3 barrels, action, scope and rings and a carrying case.

Larry
Tinkerer
 
Posts: 1259 | Location: Dallas, TX | Registered: November 09, 2008Reply With QuoteReport This Post



Picture of Leupold Man
posted Hide Post
Okay I need one for my 300WSM Striker!!!!! That is really nice!!!!!!


---------------------------------
Veteran and NRA Life Member
 
Posts: 2724 | Location: Waterloo Wisconsin | Registered: October 22, 2014Reply With QuoteReport This Post



posted Hide Post
All it takes is your present Striker stock.

Contact me via email for details.

Larry
Tinkerer
 
Posts: 1259 | Location: Dallas, TX | Registered: November 09, 2008Reply With QuoteReport This Post



posted Hide Post
Larry, Thanks a million for the details. Re-read them a couple of times as I looked at your pic. Got a couple projects going on, might have to shoot you a mail if I get boxed in if you wouldn't mind.

Jon
 
Posts: 1601 | Location: East Central Iowa | Registered: December 29, 2003Reply With QuoteReport This Post



posted Hide Post
Not a problem. Advice is free.

Larry
Tinkerer
 
Posts: 1259 | Location: Dallas, TX | Registered: November 09, 2008Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.