Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
STRIKER AND RIFLE BASIX SEAR
 Login/Join 
joeb33050

posted
Can you tell me anything about installing the rifle basix sear? I keep reading the instructions and still don't get it.
Thanks;
joe b.
 
Posts: 79 | Location: United States | Registered: November 20, 2011Reply With QuoteReport This Post
blueavenger

posted Hide Post
pull the cross pin, drop the old trigger. replace with new trigger and coil spring.
 
Posts: 2086 | Location: Kasson MN | Registered: August 20, 2006Reply With QuoteReport This Post
blueavenger

posted Hide Post
ok, on a more serious side. rear grip or center grip with the finger spur cut off, which only works with gen II and III linkage systems.
 
Posts: 2086 | Location: Kasson MN | Registered: August 20, 2006Reply With QuoteReport This Post
joeb33050

posted Hide Post
I'm talking about the replacement sear for rimfire rifles and all gen STRIKERS.

http://riflebasix.com/product/...mfire-trigger-sav-r/
 
Posts: 79 | Location: United States | Registered: November 20, 2011Reply With QuoteReport This Post
joeb33050

posted Hide Post
Where is the blue avenger? He was here, then not. How about that rifle basix sear? We need an expert! Are there any home?
 
Posts: 79 | Location: United States | Registered: November 20, 2011Reply With QuoteReport This Post
big10

Picture of big10
posted Hide Post
Which model Striker are you working with?


thumbup Rod
------------------------------
It's not a break, it's a brake, unless it's a break, then it's broke ;-)
 
Posts: 6521 | Location: Northern MN | Registered: February 17, 2006Reply With QuoteReport This Post
joeb33050

posted Hide Post
A first generation Striker
 
Posts: 79 | Location: United States | Registered: November 20, 2011Reply With QuoteReport This Post
big10

Picture of big10
posted Hide Post
Model number?


thumbup Rod
------------------------------
It's not a break, it's a brake, unless it's a break, then it's broke ;-)
 
Posts: 6521 | Location: Northern MN | Registered: February 17, 2006Reply With QuoteReport This Post
joeb33050

posted Hide Post
Model 516
 
Posts: 79 | Location: United States | Registered: November 20, 2011Reply With QuoteReport This Post
big10

Picture of big10
posted Hide Post
quote:
Originally posted by joeb33050:
Model 516


I believe that part is for rimfire Strikers:

Models: 501, 502, & 503, Mark I & II, Model 93 in both .17 & .22


thumbup Rod
------------------------------
It's not a break, it's a brake, unless it's a break, then it's broke ;-)
 
Posts: 6521 | Location: Northern MN | Registered: February 17, 2006Reply With QuoteReport This Post
blueavenger

posted Hide Post
No part avaliable for that model
 
Posts: 2086 | Location: Kasson MN | Registered: August 20, 2006Reply With QuoteReport This Post
Jamie

posted Hide Post
quote:
Originally posted by big10:
quote:
Originally posted by joeb33050:
Model 516


I believe that part is for rimfire Strikers:

Models: 501, 502, & 503, Mark I & II, Model 93 in both .17 & .22


Correct, those are for rimfire Strikers.


 
Posts: 650 | Location: South Dakota | Registered: January 05, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.