Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
HS Precision Pistol stock modification
 Login/Join 
ga sixgunner

posted
Has anyone modified an HS pistol stock with the cut out for a straight bolt to work with a dog leg bolt? Can you send me pics? Thanks
 
Posts: 950 | Location: waycross,ga | Registered: January 01, 2004Reply With QuoteReport This Post
McClura

100522

Picture of McClura
posted Hide Post
Here is the last ones that I had done. Factory 7BR XP in HS Varmint stock
Mike





---------------------------------
: Don't make old people mad. We don't like being old in the first place, so it doesn't take much to tick us off.
 
Posts: 3081 | Location: Norman, OK | Registered: November 05, 2003Reply With QuoteReport This Post
captain John

Picture of captain John
posted Hide Post
I’ve reworked several HS stocks, pretty easy job.HS will also repaint stock when your completed. I’ve always mailed them in to them during the winter months, just thinking that’s probably a little slower time for them .


IHMSA Industry Director
IHMSA Region 5 Director
Minnesota State IHMSA Director
IHMSA 39199Life
NRA life Member
 
Posts: 416 | Location: Minnesota | Registered: August 18, 2013Reply With QuoteReport This Post
magman
rooooogar lover

101023

Picture of magman
posted Hide Post
My custom XP had a dogleg bolt and HS stock. Done correctly, you don't even notice.


Tim
------------------------------

NRA PATRIOT Life Member

 
Posts: 6994 | Location: Western NY | Registered: May 29, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.