Here is another example of Mike Deloach , Nine Run Gun, brake work. I had Mike install this brake. It's absolutely seamless. He also did some more work on the marks that were on this barrel. The bottom pic is what the barrel did look like.

Looks much better.

Aaron

alright.....I have sent him too much work now....

Looks almost as good as your work Chris! Thanks for sharing.

For some reason I'm seeing Chris starting to charge commissions. Lol!

Robert, that is some great work on the break. Do you think Mike DeLoach would install a new barrel on my MOA and a break? I know you gave me another name that does it. Just checking all of my choices.

Mike

Yes. Nine run will do Moa stuff. I know he did at least one.

Richard Mertz can still do a barrel if YOU have a blank. Gary Wrigley has been doing barrels for a while.

Sorry about your barrel problem which was kind of frequent near the end. Mount screws were too long, top of the receive was ground down too much, or the pockets in the scope base were too deep the likely cause of the problem not noticed until the barrel was removed for what ever reason

Michael is the man.
He can do it.
FWIW-The bolt function of my XP-100R (6XC rear-grip) is the smoothest of any non-custom bolt I have ever had.