Specialty Pistols
xp-100 center grip trigger screws.

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/3780022007

April 29, 2021, 08:15 PM
mjshell
xp-100 center grip trigger screws.
Currently the trigger has a lot of take up and some creep. There is a set screw at the forward end of the trigger housing and a set screw at the forward end of the sear housing. Balance weight was previously removed. The trigger breaks good once you get to it.

What does each one of the screws adjust. I see no other adjustment screws.

Thanks


"The World Spins Forward"

April 29, 2021, 09:46 PM
mjshell
OK figured out the trigger housing screw. It was loose. Tightened it and that seems to have taken the take up out.

Red Loctite on the Sear housing screw. I think I will leave it alone until I do some safety checks and shoot it.


"The World Spins Forward"