Specialty Pistols
McMillan XP-100 Centergrip Stock Group Buy & Waiting List

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/3110038686

May 03, 2017, 01:59 PM
Ernie
McMillan XP-100 Centergrip Stock Group Buy & Waiting List
I will only ship within the USA.
New price is $375 Shipped

Colors: 2 colors molded in marble (Three for some combinations)

Solid fill, and inletted for the single-shot XP-100 with dog-leg bolt handle.
IF, you are using a straight bolt handle from like Kiff, you or your smith will possibly need to make slight modifications.

All forends will be opened for the Varmint taper.

IF, you have a smaller taper your barrel will have more room to breath or just DON'T get a stock from me.

IF, you need a stock for larger than a Varmint taper, then either open it up to what you need, or do NOT get a stock from me.

All forends will be threaded for a sling swivel stud (BONUS!)


IF, you KNOW you want to get on the waiting list for one or more of these center-grip stocks, email me at ernieemily@yahoo.com and tell me how many you want.
I am not going to require a deposit, as I don't want to hold your money for 5-6 months.

DO NOT email me until you know for sure you want a stock(s).
DO NOT PM HERE OR ON FACEBOOK (Email only please)

Saying you want one here, will NOT get you on the waiting list.

First and last name, email address, address for both Fed-Ex and USPS, phone #'s, and the colors you want.

This wait list will close out right before WY-SHOT, so we can get our stocks in line: 5-6 months wait time approximately.

IF, I have not emailed you back, it means either I have been busy and haven't responded yet or it didn't get to me.
Until you have an email confirmation from me, you are not on the wait list yet.
Once you have confirmation, please be content and wait until I contact you.

This message has been edited. Last edited by: Ernie,


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 03, 2017, 03:17 PM
Nitemann
What kind of price would a group by be?

Rick
May 03, 2017, 03:24 PM
Ernie
Basically the same as what you would have been be able to get it from McMillan when they were making them. Will have a reinforced area for sling swivel stud in the forend/will be inletted for the XP-100 (Single-shot)
I did not talk to Kelly about prices yet.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 03, 2017, 03:50 PM
TXBRASS
Solid fill?


CW
**********************
Get your W-GEAR shooting accessories NOW!
SP Scabbards, Rear Rest Bags, Ammo Bracelets, Front Rest Bags, & more...
Made in USA with a LIFETIME warranty!



www.codyweiser.com



- SHORT STICK BANG GANG -
May 03, 2017, 03:57 PM
Ernie
quote:
Originally posted by TXBRASS:
Solid fill?


YES!


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 03, 2017, 04:32 PM
ksbohuntr316
Possibility

This message has been edited. Last edited by: ksbohuntr316,
May 03, 2017, 04:45 PM
tgp
If it will help on delivery times I'd be in

Glenn


------------------------------
“Evil, unchecked, is the prelude to genocide. - Anonymous”
― Joel C. Rosenberg, The Auschwitz Escape


May 03, 2017, 05:42 PM
Mike72
I'd be interested.
May 03, 2017, 05:49 PM
40xmike
quote:
Originally posted by tgp:
If it will help on delivery times I'd be in

Glenn


X2

-Mike
May 03, 2017, 05:57 PM
rickiesrevenge
If the price is right I'd do it.

Aaron
May 03, 2017, 06:56 PM
Freeze
Interested ...
Price and date of funds due will dictate my participation.

-Freeze
May 03, 2017, 06:56 PM
Pa. Mike
I have two on order now but I would be interested in a third. Hopefully they would waive their ridiculous 8-10 month delivery time if they had enough orders.
May 03, 2017, 07:39 PM
Ernie
Okay, I will go forward with this next week


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 03, 2017, 09:48 PM
nmhunter
Yes I would be interested as well. Did he talk about a shorter wait time. After the number is decided I can swing by and re confirm the SP influence that is out there. I go right by them most every day. My face is known to the ladies at the front office.
May 03, 2017, 10:43 PM
Dekker
I am interested also. I have a XP sitting in the back of the safe that has been asking for a new stock.
May 03, 2017, 10:51 PM
cba257
I would.be in.
May 03, 2017, 11:34 PM
KYODE
Confused

Not sure which interests me most....the chassis being developed....or
???

I want a direct bolt in....no bedding blah blah blah....

Pros cons?


------------------------
~Kentucky....there is no place i'd rather be~

Join the NRA
May 04, 2017, 12:01 AM
McClura
I'm interested. Cost and time frame would dictate pulling the trigger.

Mike


---------------------------------
: Don't make old people mad. We don't like being old in the first place, so it doesn't take much to tick us off.
May 04, 2017, 01:51 AM
Rog (Buttermilk421)
I'm interested.


Regards,
Rog (Buttermilk421)


May 04, 2017, 02:34 AM
Ernie
I was thinking doing a Senderofan taper or just a tad smaller diameter.
If someone does a larger diameter someone with the mill can easily open that up

Thoughts??? Yes


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 04, 2017, 03:54 AM
NVJohn
Ernie,

I would be interested too.

Thanks,

John
May 04, 2017, 06:11 AM
BLASERMAN
I am in
May 04, 2017, 07:21 AM
17VLD
Pretty sure I will take one,would like to know price and time frame.
I understand the rear grip mold was destroyed,what is the possibility of them making a new one,I would take 2 or 3 of those Big Grin
Matt


------------------------------
NRA BENEFACTOR MEMBER
VHA LIFE MEMBER
IBS MEMBER
May 04, 2017, 12:12 PM
old leghumper
quote:
Originally posted by nmhunter:
Yes I would be interested as well. Did he talk about a shorter wait time. After the number is decided I can swing by and re confirm the SP influence that is out there. I go right by them most every day. My face is known to the ladies at the front office.


Maybe on one of your visits you could check on exactly which mold was broken. A good source t old me that it was NOT the rear grip stock.

Also to encourage McMillan on the group buy, EVERYONE should order an extra stock to get the numbers up.


----------------------
Never argue with an idiot: they will drag you down to their level and beat you with experience!
I am that idiot.
May 04, 2017, 02:55 PM
Sawcarver
I'm in
May 04, 2017, 04:52 PM
Pat
Interested
May 04, 2017, 06:10 PM
Jay HHI6818
I'm interested too
May 04, 2017, 06:42 PM
Arrowflinger
I am also interested. I've been wanting to convert my rear grip 22BR back to a center.
Derek >>>---------->
May 04, 2017, 09:10 PM
nmhunter
Will do that OLH
May 05, 2017, 01:36 PM
Shaggy357
I am in for at least one. May sneak in two if the price is right.
Need to talk to someone about a 20BR build in the near future.....hint hint. Big Grin


Steve Smile
---------------------------------
"Life is a play before an audience of one. When your play is over, will your audience stand and applaude, or stay seated and cry?"
May 05, 2017, 06:22 PM
nmhunter
So Ernie , will all of them have to have the same channel cut,cut out for safety, etc;?
Nmhunter
May 05, 2017, 09:15 PM
rickiesrevenge
quote:
Originally posted by Shaggy357:
I am in for at least one. May sneak in two if the price is right.
Need to talk to someone about a 20BR build in the near future.....hint hint. Big Grin


Why on earth would anyone want a 20BR? devil

Aaron
May 06, 2017, 12:05 PM
cba257
I need to find sombody to put my parts together for a 17 Practical to put in the new stock. 1:6 twist, to shoot loooong heavy bullets, PTG bolt, 8-25 Leupold.....he he. Big Grin devil

Cody
May 06, 2017, 08:09 PM
bowstryder
I'd be interested as well
May 09, 2017, 03:55 PM
red65
I'm interested.
Jon
May 10, 2017, 12:26 AM
Gary T
quote:
Pretty sure I will take one,would like to know price and time frame.

Me too. thumbup


Good luck and good hunting.
May 11, 2017, 08:57 PM
semperfi
I'm out of town for 2 weeks at a time, but would be in for one or two.
depending on price. What about colors? Any choices? molded in colors?
Thanks.


SemperFi


veteran USMC
NRA life member
NAHC life member
May 12, 2017, 12:22 AM
brettdc
I might have to get one too.
How much and when will dictate if I can.

Thanks
Brett
May 13, 2017, 10:14 AM
Muskox
I want in on this, if it happens. I am in Germany so I want them sent to Dad in Cheyenne.

Depending on where you end up I want at least 1 and maybe 3 or 4.
May 13, 2017, 10:24 AM
Ernie
For me to do a group buy, I know now, I need to purchase 10 or more.
Even with 10 or more it will be a 5-6 month wait time-Typical wait time for rifle stocks as well now.

I need to find out some more details about colors and the amount the forend is opened up, for me to be sure on price yet.


What would be the typical barrel taper you would use?????


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 13, 2017, 10:56 AM
Gator T/C
Heavy sporter taper, in for one

Brad


------------------------------
Contender 22LR, 17MachII, 17HMR, .223(SSK), 6mm Gator, 6TCU, 6mmJDJ(Van Horn), 25x47(Coyote), 6.5 JDJ(SSK), 7x47(SSK),308 Bellm, .338 SSK Woodswalker (2),358 Bellm, 375Win, 375 JDJ(SSK), 45/70(SSK), 45/70 (VanHorn), 50-70(SSK)
Encore .243, 7mm–08, 300WM(15-1/4"), 50-90(MGM, 14"), 50–110 (MGM), .50ML(16")
XP-100 .223, .223AI, 6mm204Imp, .243AI, 6BR
XP-7 .223,.243,.300Blackout, .300RSAUM
XP-700SA .22LR, .243
XP-700LA .25/06, .270AI, .300WM,.338 Lapua, .510 Whisper
May 13, 2017, 10:59 AM
Ernie
There has been a price increase which took place last week. McMillan raised their prices. If, you are already on the list, your price should remain the original price.
New price is $375 Shipped

This message has been edited. Last edited by: Ernie,


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 13, 2017, 11:12 AM
semperfi
{What would be the typical barrel taper you would use?????}

sendero taper please.

SemperFi


veteran USMC
NRA life member
NAHC life member
May 13, 2017, 11:28 AM
Ernie
I am not sure yet if color changes from one stock to the next will effect price.
Pretty sure I need to use one taper though.
I will get answers to these questions next week.

IF, you KNOW you want to get on the waiting list for one or more of these center-grip stocks, email me at ernieemily@yahoo.com and tell me how many you want.
I am not going to require a deposit, as I don't want to hold your money for 5-6 months.
DO NOT email me until you know for sure you want a stock(s).
Saying you want one here, will NOT get you on the waiting list.

First and last name, email address, address for both Fed-Ex and USPS, phone #'s, colors (IF we get options).

List your barrel tapers preference here.
More info to come, once I know more.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 13, 2017, 03:34 PM
Mike72
Not sure of the actual taper name but its for a heavy barrel Remington custom shop gun.
May 13, 2017, 03:51 PM
semperfi
once i know the specs i will let you know.


SemperFi


veteran USMC
NRA life member
NAHC life member
May 13, 2017, 09:53 PM
BruceP
I might be in for one depending upon final spec's and price.

Bruce
May 15, 2017, 04:57 PM
MClark
If Nitemann and nmhunter are in I will be part of the Arizona team too.
Put me down for one.

Mark
May 16, 2017, 11:29 AM
Nitemann
Does the McMillian have enough forend width to accept a straight 1.250 barrel?
May 16, 2017, 12:01 PM
Ernie
quote:
Originally posted by Nitemann:
Does the McMillian have enough forend width to accept a straight 1.250 barrel?


I believe so


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 16, 2017, 12:27 PM
Hoggin
quote:
Originally posted by Ernie:
quote:
Originally posted by Nitemann:
Does the McMillian have enough forend width to accept a straight 1.250 barrel?


I believe so


Yes. I know I opened atleast one to that
May 16, 2017, 12:44 PM
ksbohuntr
Email sent Ernie.
May 16, 2017, 03:07 PM
Ernie
There has been a price increase which took place last week. McMillan raised their prices. If, you are already on the list, your price should remain the original price. I will only ship within the USA.
New price is $375 Shipped

Colors: 3 colors molded in marble (Three for some combinations)

Solid fill, and inletted for the single-shot XP-100 with dog-leg bolt handle.
IF, you are using a straight bolt handle from like Kiff, you or your smith will possibly need to make slight modifications.

All forends will be opened for the Varmint taper.

IF, you have a smaller taper your barrel will have more room to breath or just DON'T get a stock from me.

IF, you need a stock for larger than a Varmint taper, then either open it up to what you need, or do NOT get a stock from me.

All forends will be threaded for a sling swivel stud (BONUS!)


IF, you KNOW you want to get on the waiting list for one or more of these center-grip stocks, email me at ernieemily@yahoo.com and tell me how many you want.
I am not going to require a deposit, as I don't want to hold your money for 5-6 months.

DO NOT email me until you know for sure you want a stock(s).
DO NOT PM HERE OR ON FACEBOOK (Email only please)

Saying you want one here, will NOT get you on the waiting list.

First and last name, email address, address for both Fed-Ex and USPS, phone #'s, and the colors you want.

This wait list will close out right before WY-SHOT, so we can get our stocks in line: 5-6 months wait time approximately.

IF, I have not emailed you back, it means either I have been busy and haven't responded yet or it didn't get to me.
Until you have an email confirmation from me, you are not on the wait list yet.
Once you have confirmation, please be content and wait until I contact you.

This message has been edited. Last edited by: Ernie,


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 16, 2017, 05:37 PM
Nitemann
quote:
Colors: 2 colors molded in marble (Three for some combinations)


Ernie can you elaborate on this please?

Rick
May 16, 2017, 05:47 PM
Ernie
I was told most of the marble mold in are two colors, but some are three like red, white, and blue.
Check on the McMillan website


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 16, 2017, 06:03 PM
Nitemann
"Choose any 2 or 3 of the molded in colors to create a unique swirled marble pattern finish for your custom stock. Literally thousands of different patterns can be created, including any you see on our website."

Ernie I do not see anything for set colors, only the above statement and a chart with several colors to choose from. Am I not looking in the right place?
May 16, 2017, 06:33 PM
Ernie
quote:
Originally posted by Nitemann:
"Choose any 2 or 3 of the molded in colors to create a unique swirled marble pattern finish for your custom stock. Literally thousands of different patterns can be created, including any you see on our website."

Ernie I do not see anything for set colors, only the above statement and a chart with several colors to choose from. Am I not looking in the right place?


Pick the colors you want, send it to me and I will confirm you can choose it.
There are thousands of options.
Some she mentioned to me that are popular:
coyote ambush, urban spectre, blue and white, light tan and olive, Purple and white, black and white, olive and tan, olive and black and tan, Dark brown and tan.

You can also choose like 70% blue and 30% white Big Grin


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 16, 2017, 07:53 PM
Mike72
If you do a websearch for Mcmillan mcswirly colors you get a website that has over 200 pictures of the different color combos.

http://precisionrifleblog.com/...stock‑colors‑photos/
May 16, 2017, 08:13 PM
Ernie
http://precisionrifleblog.com/...stock-colors-photos/http://precisionrifleblog.com/...stock-colors-photos/


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 16, 2017, 09:55 PM
nmhunter
Well done Ernie, I have found the 80/20 mix looks great on the xp stock, the 50/50 looks good also. I have the woodland spectre and for a camo style color it is pretty cool. I have a few tri color as well, they are in a40/40/20 blend with the20%in a dark grey or black as a accent color. Like Ernie said a lot of color combinations. One question Ernie, will they ship all of them to you or to each one of us that orders? I want one, dark grey (80%), dark blue (20%). I have one on order now, I will see if I can move it over to the group buy, I will let you know.
Tom
May 16, 2017, 10:49 PM
Ernie
Everything will ship to me.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 17, 2017, 12:40 AM
Arrowflinger
Email sent,
Thank you Ernie.
Derek >>>-------->
May 17, 2017, 01:49 PM
Ernie
Updated information:
We can make the XP100 stocks in our carbon finishes; but there would be an additional $55.00 charge for the graphite (edge tech) outer shell.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 17, 2017, 02:09 PM
Ernie
I have 7 stocks on the wait list.
Once I get to 10, I will make an order, so those 10 stocks can get in line as soon as possible.
Then, when I get another 10 stocks, I will put that order in as well.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 17, 2017, 04:55 PM
Ernie
First 10 have been ordered! happy


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 17, 2017, 06:53 PM
BLASERMAN
Ouestion

If we ordered 2 colors,did we have to request
80/20 or 50/50 colors
May 17, 2017, 07:02 PM
Ernie
quote:
Originally posted by BLASERMAN:
Ouestion

If we ordered 2 colors,did we have to request
80/20 or 50/50 colors


Yes! Please tell me the percentage that you want.
Thanks


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 17, 2017, 07:05 PM
Ernie
Keep asking questions. This is new to me as well.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 18, 2017, 02:13 PM
Ernie
Just sent in orders 11-20 (second set of 10).


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 19, 2017, 09:31 AM
Ernie
The second set of 10 stocks have been ordered. Both orders were actually one day apart.
I currently need 5 more stock orders to finish up the third set of 10.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 20, 2017, 12:44 PM
Ernie
3rd set of 10 (30 in all) already, and I have started the beginning for the 4th set of 10 (31) this morning.
I didn't expect to get this many, little alone, this many, this quick! thumbup


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 20, 2017, 09:32 PM
ksbohuntr
Someone had a good idea.
May 24, 2017, 10:47 AM
Ernie
I put my fourth order of stocks in yesterday.
42 XP-100 stocks in all-WOW!

I will keep the list going, but it will likely take awhile before I reach 10 or more stocks. Right now everyone who has contacted me for a stock is in line.

So realize, if you get on the waiting list now, it will be more than a 5-6 month wait time, but still shorter than if you ordered one yourself directly.
Of course, if 5 more people get on the wait list, and no one else does, the order won't be turned in until I get 10 or more.

I will probably make a new post about this once a year and see if the interest at that time is enough to do 10 or more.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 25, 2017, 03:15 PM
Ernie
McMillan is letting me keep the 4th order as an active, ongoing list, right up until they start production.

This will allow anyone to get in line for a stock still and not have to wait for a longer period of time.

We are on stock #44 now, if you are interested in such things.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 26, 2017, 05:42 AM
Shaggy357
With 40+ stocks of the same design on order, you would think they would speed up the process to rake in the $$s....... Roll Eyes

If they outsource that to Aaron it would take about....... Big Grin


Thanks, Ernie. I appreciate your willingness to handle this group buy.


Steve Smile
---------------------------------
"Life is a play before an audience of one. When your play is over, will your audience stand and applaude, or stay seated and cry?"
May 26, 2017, 09:55 AM
Ernie
quote:
Originally posted by Shaggy357:
With 40+ stocks of the same design on order, you would think they would speed up the process to rake in the $$s....... Roll Eyes

If they outsource that to Aaron it would take about....... Big Grin


Thanks, Ernie. I appreciate your willingness to handle this group buy.



They only have one mold for the pistol stock, first of all.
Second, they do a lot of rifle stocks, with many ahead of us.
You are welcome.

If you wanted 44 of the NEO, MINI, JOY-POD, or MAX joystick rests from me, it would still take the same time (6-12 months) as if you ordered one.


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
May 26, 2017, 01:33 PM
MClark
I don't think 40 is a large order.
Browning is now using McM stocks
http://www.browning.com/produc...-range-mcmillan.html
July 17, 2017, 07:07 PM
Ernie
The first five of 60 center-grip stocks should arrive this week.
Several of you will be getting emails sometime this week or next.
happy


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
July 17, 2017, 07:11 PM
Ernie
This has been fast, noting that I started this thread on the 3rd of May!


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
July 17, 2017, 08:35 PM
Freeze
That is great news, and much sooner than expected!

I think I was in the second group so I will keep an eye out for an email with further instructions.

Thanks again Ernie.

-Freeze
July 17, 2017, 09:46 PM
BruceP
Fast service. Even though I'm in one of the last groups I guess I better start saving my dimes. Big Grin

Bruce
July 17, 2017, 09:46 PM
bowstryder
We got 60 ordered?!?!? Way to go everyone!!!!! And again thank you to our fearless leader in this group buy!
July 17, 2017, 10:45 PM
Arrowflinger
That's great news! They really cranked them out.
Thanks again Ernie.
Derek >>>------>
July 18, 2017, 08:31 AM
40xmike
thumbup thumbup


-Mike
July 19, 2017, 10:45 AM
Ernie
5 came in yesterday...#'s 6-10
I asked why the order was not from the start, and I got a quick reply:
"Unfortunately, the way our production is set up, it would be very time consuming to ship them in # order and lead time would be twice as long.

Some stocks take a little longer than others. Sometimes the stocks get smashed in the milling machines, and then we have to re-make it. There are many different reasons why they don’t get finished in order.

I have more to ship today and some will be from the first batch and I have a few from the second batch too."

So don't worry or get bent out of shape if some guys that got on the list later, get them sooner. Just keeping you guys informed


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
July 19, 2017, 01:22 PM
Arrowflinger
Thanks Ernie
July 19, 2017, 06:57 PM
Ernie
The second one (from left to right) has a twin.



Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
July 19, 2017, 08:39 PM
Freeze
They look real good.
I really like the one on the far left!

Thanks again for doing this for the group Ernie.


-Freeze
July 19, 2017, 09:30 PM
Arrowflinger
Nice!
That red and black one will go under my 22BR. With my recently delivered Dell Taylor trigger. I love it!!
Derek >>>--------->
July 19, 2017, 09:31 PM
BruceP
I don't know what the percentages are on the third one but mine should be similar. Big Grin

Bruce
July 19, 2017, 10:50 PM
Ernie
quote:
Originally posted by Freeze:
They look real good.
I really like the one on the far left!

Thanks again for doing this for the group Ernie.


-Freeze

Far left is: 60%med tan 20% med brown 10%black 10%white


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
July 19, 2017, 10:51 PM
Ernie
quote:
Originally posted by BruceP:
I don't know what the percentages are on the third one but mine should be similar. Big Grin

Bruce


50% Red and 50% black is the one pictured


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
July 20, 2017, 05:38 AM
Shaggy357
quote:
Originally posted by Ernie:



Be careful you don't leave the one on the left on the floor. The way it matches the carpet, you may miss seeing it and step on it. That would hurt the footsies. Big Grin

Like Christmas in July!! Merry Christmas everyone!!


Steve Smile
---------------------------------
"Life is a play before an audience of one. When your play is over, will your audience stand and applaude, or stay seated and cry?"
July 20, 2017, 08:52 AM
Nitemann
Thanks for posting pics of the stocks Ernie, we could have a pic your stock contest. Big Grin

Now the 3 month wait for the new barrel blank. Sad

Rick
July 20, 2017, 08:57 AM
Smokin7mm
drool drool drool

Very nice.

Bret


IHMSA #49266
PBRC match director
IHMSA Washington State Director
July 20, 2017, 01:07 PM
GoWyo!
That far left stock is awesome! I haven't even shot my new XP and I want one! Is the group buy still ongoing ?
July 20, 2017, 01:14 PM
40xmike
Ernie,
The stock second from the left wouldn't be the Woodland Carbon Ambush would it?

Thanks,

-mike
July 20, 2017, 02:15 PM
Freeze
quote:
Originally posted by Ernie:
quote:
Originally posted by Freeze:
They look real good.
I really like the one on the far left!

Thanks again for doing this for the group Ernie.


-Freeze

Far left is: 60%med tan 20% med brown 10%black 10%white


Thanks for the info ....

I was going for a similar look with one mine when I ordered
60% Woodland Beige / 30% Black / 10% Light Gray

Not exactly the same but should have a similar look.

-Freeze
July 20, 2017, 05:05 PM
Sawfish
Very nice. Great job Ernie!


------------------------------
Good Shooting Makes Good Hunting
NRA Patron Member, FTRA Member;
Life Member SCI, NAHH, RMEF, and NSRPA; HHI Member #7108, Member CBA, NSSF

"A man can never have too much red wine, too many good books, or too much ammunition."
Rudyard Kipling
July 20, 2017, 05:36 PM
Rog (Buttermilk421)
Ernie, those look nice!

Is it still open to get in line for a stock?

What's the color on the second from the left stock?


Regards,
Rog (Buttermilk421)