Support Our Sponsors! Click On Their Banner To Visit Their Site!

Moderators: nmhunter
Help Login/Join 


Picture of Arrowflinger
Hey all,
How difficult is it to modify a Savage Striker mid trigger to a rear trigger? It's a 6mm Norma that I am looking to change over.
Also, Anyone on this forum making or know who is still making aluminum chassis?
Thank you in advance.
Posts: 910 | Location: Bay Area California | Registered: April 19, 2016Reply With QuoteReport This Post

posted Hide Post
Remove mid trigger linkage to trigger and trigger. May have to cut/remove assembly from internal magazine. Replace with rifle trigger. Shoot.

7fingers is making an aluminum rear trigger stock last I heard.

Posts: 1259 | Location: Dallas, TX | Registered: November 09, 2008Reply With QuoteReport This Post

posted Hide Post
Call Joe Updike

He sells the accurate rifle system and will put in the right direction, I'm in the process of changing a 308 mid grip to a 6.5 creedmoor rear grip.
Posts: 30 | Location: Reno Texas | Registered: February 01, 2015Reply With QuoteReport This Post

posted Hide Post
I remembered Randy posting this one when I was thinking about Savage actions.

Posts: 1624 | Location: East Central Iowa | Registered: December 29, 2003Reply With QuoteReport This Post
  Powered by Social Strata  

© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.