Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
Stock , factory XP questions. Login/Join 


081723



Picture of Pa. Mike
posted
I have two questions regarding factory "Stock" XP's. First , will a 7mm br factory stock fit a .35 rem , are barrel contours the same? Second , I've seen several XP's where the barrel tends to rise up out of the stock slightly near the muzzle as if it is "Free-Floated" near the black tip. I have read and seen that there are spacers listed in parts diagrams of the XP and if only using a forward spacer on the main action screw would case this? Anyone have any thoughts on these two questions? Thanks in advance for any input ! scratch head
 
Posts: 944 | Location: South Central Pennsylvania | Registered: February 07, 2016Reply With QuoteReport This Post



Picture of big10
posted Hide Post
quote:
will a 7mm br factory stock fit a .35 rem


Yes.


thumbup Rod
------------------------------
It's not a break, it's a brake, unless it's a break, then it's broke ;-)
 
Posts: 6521 | Location: Northern MN | Registered: February 17, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.