Specialty Pistols
XP-100 trigger mechanism

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/2430032976

August 25, 2015, 10:13 AM
Rog (Buttermilk421)
XP-100 trigger mechanism
I've discovered that the XP-100 trigger mechanism where it bolts to the recoil lug apparently has screws that are staked.

What is the best way to remove these screws?

Thanks.


Regards,
Rog (Buttermilk421)


August 25, 2015, 10:21 AM
Rog (Buttermilk421)
Actually, I just got them out.

Anyone have some extra screws that hold the mechanism to the recoil lug?

Smile

Thanks.


Regards,
Rog (Buttermilk421)


August 25, 2015, 10:26 AM
40xmike
Rog,

It depends on the severity of the staking. I usually start by removing the trigger assy from the receiver to you can swing it out of the way. A long screw driver that fits the slot as close as possible is of benefit. The longer screw driver will get you lined up better and offer more leverage. I have had to drill out many of these screws because they were staked so heavily ohboy

If you end up ruining these screws, let me know and I'll send you some new ones.

-Mike
August 25, 2015, 11:15 AM
Rog (Buttermilk421)
Thanks Mike. I did actually ruin those screws... nuts

If you have some you can spare I'd appreciate it. Let me know how much to send you and I'll get you some funds to cover.

Regards,
Rog

Roger Carlton
4806 Bermuda Circle
Sand Springs, OK 74063

918-704-5913


Regards,
Rog (Buttermilk421)


August 25, 2015, 01:15 PM
40xmike
Rog,
I'll get those machined sometime this week and on their way to you.
They will be stainless steel allen head screws if that's alright?

-Mike
August 25, 2015, 02:52 PM
paperpuncher
You know the last time I was in Ace hardware(about 2 weeks ago)
they had about four or five screw drawers marked "GUN SCREWS".
I took a peek in one just curious didn't need any and the one I looked in
had little screw like for scope base and so forth. Just wondering
if anybody had noticed or seen this.

Scott
August 25, 2015, 03:41 PM
Nitemann
Scott,

you must have a special Ace Hardware, I'm always looking for those type of screws and our stores having nothing I'm looking for. Looks like I may need to go west.

Rick
August 25, 2015, 03:44 PM
Rog (Buttermilk421)
Mike, that is fine. Much appreciated!

Thanks.


Regards,
Rog (Buttermilk421)


October 15, 2020, 10:47 PM
longbarrel
Resurrecting an ancient thread! I need two of the trigger housing to recoil lug screws. If someone knows the thread size/pitch I could probably modify some allen head (socket head) screws. Thanks.
October 16, 2020, 01:24 PM
longbarrel
OK it looks like the screws are 5-40 thread.
October 16, 2020, 08:10 PM
Gator T/C
There is another option. I have drilled out a lot and re-tapped them to 6-48 and use torx head scope screws!

Brad


------------------------------
Contender 22LR, 17MachII, 17HMR, .223(SSK), 6mm Gator, 6TCU, 6mmJDJ(Van Horn), 25x47(Coyote), 6.5 JDJ(SSK), 7x47(SSK),308 Bellm, .338 SSK Woodswalker (2),358 Bellm, 375Win, 375 JDJ(SSK), 45/70(SSK), 45/70 (VanHorn), 50-70(SSK)
Encore .243, 7mm–08, 300WM(15-1/4"), 50-90(MGM, 14"), 50–110 (MGM), .50ML(16")
XP-100 .223, .223AI, 6mm204Imp, .243AI, 6BR
XP-7 .223,.243,.300Blackout, .300RSAUM
XP-700SA .22LR, .243
XP-700LA .25/06, .270AI, .300WM,.338 Lapua, .510 Whisper
October 17, 2020, 09:04 AM
longbarrel
Thanks. I have a 6-40 tap coming, figuring I could just use the existing threads and open them up from .125" to .135" diameter pretty easily. I have a set of Pachmayr torx head screws that includes two lengths of 6-40 with the correct head depth (.095"). Using a file and drill press, I reduced the head diameter to .184".