Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
MOA
 Login/Join 
BSCOTT

posted
Greetings! It's been awhile for me fellow handgunners! I am in search of a drawing (parts) for my MOA. I lost my assembly sheet. I have two barrels a rimfire .22 and a 6br. I want to shoot my 6br but I want to make sure have the right block and etc assembled correctly. Also I know I am missing a few screws that I need to order. Can anyone help?


Brandon
 
Posts: 141 | Location: Louisiana | Registered: December 02, 2007Reply With QuoteReport This Post
old leghumper

Picture of old leghumper
posted Hide Post
Centerfire blocks have the firing pin centered in the block, the .22 block has the firing pin offset lower in the block, also if you look at the rear of the block the pin diameter is larger. As for screws try calling Rich first(307 283 3030),not sure if the new owner is up and running yet.


----------------------
Never argue with an idiot: they will drag you down to their level and beat you with experience!
I am that idiot.
 
Posts: 1506 | Location: Purgatory(Ohio)  | Registered: June 17, 2007Reply With QuoteReport This Post
deepwater

posted Hide Post
There is an exploded view drawing in the "parts" section on the MOA web page.
Good luck,


deepwater
 
Posts: 238 | Location: Virginia | Registered: November 19, 2013Reply With QuoteReport This Post
braud357

posted Hide Post
Brandon, I can help you with that if you cannot figure it out !
 
Posts: 1362 | Location: Gonzales, LA | Registered: October 23, 2005Reply With QuoteReport This Post
ssphunter

posted Hide Post
I have a copy of my instructions I received with my gun that I can email you if you want.
Mike


------------------------------
Enjoy your family and friends today as they may not be here tomorow.
 
Posts: 482 | Location: Manitoba | Registered: January 16, 2010Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.