Specialty Pistols
new hog leg with a bolt

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/2110033596

September 16, 2019, 12:21 AM
foxhunter
new hog leg with a bolt
15" full cylinder barrel in 6 ppc.

This message has been edited. Last edited by: foxhunter,
September 16, 2019, 06:17 AM
17VLD
Very nice,was just thinking about a no turn 6ppc.
Most in the br game turn necks,curious with nice brass if neck turning is even needed these days.
Matt


------------------------------
NRA BENEFACTOR MEMBER
VHA LIFE MEMBER
IBS MEMBER
September 16, 2019, 06:50 AM
Olrustyencore
I have a no turn 6ppc in a mgm barrel on an encore. I use Norma brass. It mics out at .265” with a seated bullet. I had my chamber reamed to .268”. It shoots great and the Norma brass so far is doing very well. I get 1/4” groups out of it and am very pleased so far.


Rusty
—————————
“Dyin ain’t much of a livin”
Josey Wales
September 16, 2019, 06:54 AM
Lorinorm53
I have less than 60 rounds through my 6PPC but have shot a couple of 3 shot groups under .30. Used .220 Russian brass and I haven’t turned the necks. I am amazed at how well it shoots
September 16, 2019, 10:50 AM
foxhunter
what kind of velocity are you guys getting and what bullet weight. I have not shot the pistol yet. the chamber is a .264 neck. I'm waiting to get my hands on the brass before ordering a bushing for my Redding types s die. any thoughts on bushing size?
still have to check the twist rate to see what bullet to use, wild guess is 1-14.

anyone recognize the stock as to mfg?
September 16, 2019, 12:09 PM
Lorinorm53
No idea on velocity. Shooting 68 grain Bergers. 1 to 8 twist in a 16 inch barrel
September 16, 2019, 02:24 PM
Olrustyencore
Haven’t checked the velocity yet but I used Sierra match king hpbt and nosler varmageddon both in 70 gr. With 26 gr of H322. It’s a 15.875” barrel with a 1:10 twist. I’m seating my bullets .001” off the lands but still thinking about tinkering with that. scratch head I’ve got really good groups from both loads gibbing the edge to the sierras maybe. Thinking about trying a 68gr Berger and possibly N133.


Rusty
—————————
“Dyin ain’t much of a livin”
Josey Wales
September 16, 2019, 08:15 PM
Leupold Man
Nice Congrats!!!!!


---------------------------------
Veteran and NRA Life Member
September 16, 2019, 08:48 PM
Roger Davis
Very nice rig. I wanted to go to a 6PPC, but with all the work with neck turning and finding the brass and forming, i decided to go with the 6mmbr. Curious about a no turn 6PPC. Roger.


Navy Chief. Retired.
September 17, 2019, 07:46 AM
Lorinorm53
Forming the brass was fairly easy. I planned on turning the necks after the first time firing but the consistency I am getting makes me question whether it is worth it. I also loaded and shot 5 rounds with the 95 grain Bergers. Same result, one hole on the target. Norm
September 17, 2019, 10:04 AM
Ernie
Good looking set-up!


Ernie (xphunter) "The Un-Tactical"
WY-SHOT 2022 June 20-22
September 17, 2019, 10:17 AM
Mntngoat
Matt go .274" for a no turn

ML
September 20, 2019, 02:10 PM
DAN L
No turn 6 PPC is a better bet than a Br
I have built both, I do not even shoot the Br
Mine is .272

DAN

September 23, 2019, 08:49 PM
foxhunter
well guys I got to shoot the xp-100 today, this was the only load I got to shoot. 25 gr h322 with 70 gr nosler balistictips, velocity was 2551 fps. range was 100 yards with calm conditions and 75*.

This message has been edited. Last edited by: foxhunter,
September 24, 2019, 10:36 AM
Jay HHI6818
Great group! thumbup won’t have to do much load development.
September 25, 2019, 09:51 AM
foxhunter
I put a 3-12 Burris scope on it, helps when you can see what you are shooting at.
September 25, 2019, 11:13 AM
Olrustyencore
Wow! Looks like you found its load on the first go round. What’s that group measure? Gotta love the 6 ppc


Rusty
—————————
“Dyin ain’t much of a livin”
Josey Wales