Specialty Pistols
Need rear screw for xp-100

This topic can be found at:
https://specialtypistols.infopop.cc/eve/forums/a/tpc/f/3826077864/m/1760042086

November 01, 2015, 09:54 PM
OneGoodShot
Need rear screw for xp-100
Picked up a center grip xp-100 with an hs stock. It is missing the rear screw. Looks like there are 2 types????

Where can I get the a rear screw???

Thanks,
Joe


------------------------------
I'm Ya Huckleberry
An armed man is a Citizen, an unarmed man is a Subject.
November 01, 2015, 11:55 PM
McClura
I got a set for my XP from Gun Parts Incorporated.

Mike


---------------------------------
: Don't make old people mad. We don't like being old in the first place, so it doesn't take much to tick us off.
November 02, 2015, 11:29 AM
Shaggy357
10-32 will work. You will have to turn down the screw head. The 10-32 "T-Nuts" will slide down the slot in the stock. That is what I used on my recent build.


Steve Smile
---------------------------------
"Life is a play before an audience of one. When your play is over, will your audience stand and applaude, or stay seated and cry?"
November 02, 2015, 12:23 PM
bowstryder
X2 on gun parts inc. I just ordered two sets. I thint total with shipping it was 15 bucks. Not cheap for just 4 screws but....... they are correct and to my door. Hth
November 02, 2015, 01:21 PM
Nitemann
Just take your HS stock to the local hardware store. No t-nut to slide in the HS. 10-32 sounds right but it may also be 8-40. Like stated you probably will have to turn the head down a little to fit in the action recess enough to clear the bolt. You will also have to cut the screw to length.

Rick
November 02, 2015, 04:36 PM
OneGoodShot
thanks fellas!!


------------------------------
I'm Ya Huckleberry
An armed man is a Citizen, an unarmed man is a Subject.