Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
MOA trigger
 Login/Join 
wcurlin

posted
Having a problem with my MOA's trigger. It was falling off sear, so I stoned the sear on the hammer. It imporved but now, trigger pull is very inconsistent. When i eject a case, it falls off sear. Are there any secrets to stoning the hammer/trigger?


IHMSA 44463
Last of the try hards!
You greenhorns are gonna ruin this sport!
I hate this game and the poeple that play it!
 
Posts: 38 | Location: ky | Registered: October 03, 2011Reply With QuoteReport This Post
old leghumper

Picture of old leghumper
posted Hide Post
You may have had dirt, grease or whatever on the sear notches or the screws may have worn out(greased?). Since you stoned them without the fixture they are probably ruined. Have one of each for sale(new) if interested.


----------------------
Never argue with an idiot: they will drag you down to their level and beat you with experience!
I am that idiot.
 
Posts: 1514 | Location: Purgatory(Ohio)  | Registered: June 17, 2007Reply With QuoteReport This Post
braud357

posted Hide Post
Will, ask Allen Gaskin - I think that he has done several of his MOA's
 
Posts: 1365 | Location: Gonzales, LA | Registered: October 23, 2005Reply With QuoteReport This Post
wcurlin

posted Hide Post
Thanks Phillip, I took it apart and it was filthy, imagine that. Ill try at Lawrenceburg Sunday.


IHMSA 44463
Last of the try hards!
You greenhorns are gonna ruin this sport!
I hate this game and the poeple that play it!
 
Posts: 38 | Location: ky | Registered: October 03, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.