Support Our Sponsors! Click On Their Banner To Visit Their Site!


Moderators: nmhunter
Go
New
Find
Notify
Tools
Reply
  
savage striker bolt face
 Login/Join 
paperpuncher

posted
where are you guys getting you bolt faces.I have a 22-250 striker that I think I want to change to a 223 bolt face.

Scott
 
Posts: 558 | Location: Goodyear,Arizona | Registered: January 05, 2012Reply With QuoteReport This Post
tinkerer

posted Hide Post
Surely someone here will have a 223 bolt for a trade.

Larry
 
Posts: 1259 | Location: Dallas, TX | Registered: November 09, 2008Reply With QuoteReport This Post
Nitemann

0716223

Picture of Nitemann
posted Hide Post
savage bolt head

Rick

This message has been edited. Last edited by: Nitemann,
 
Posts: 3551 | Location: Mesa, Arizona | Registered: January 18, 2004Reply With QuoteReport This Post
paperpuncher

posted Hide Post
Rick....I thought the firing pin holes were different sizes. I was reading that savage had made changes some years ago the new ones have a smaller diameter firing pin and cross pin holes was also smaller. I could be wrong but I believe mine has the larger pin...can't remember the exact specs

Scott
 
Posts: 558 | Location: Goodyear,Arizona | Registered: January 05, 2012Reply With QuoteReport This Post
Nitemann

0716223

Picture of Nitemann
posted Hide Post
Scott,

get a hold of these guys http://www.sharpshootersupply.com/

Fred will be able to answer all your questions and has the bolt heads for sale as well. I was thinking the Midway one was the older model but could be wrong.

Rick
 
Posts: 3551 | Location: Mesa, Arizona | Registered: January 18, 2004Reply With QuoteReport This Post
paperpuncher

posted Hide Post
thumbup thx

Scott
 
Posts: 558 | Location: Goodyear,Arizona | Registered: January 05, 2012Reply With QuoteReport This Post
MK 19

posted Hide Post
Numrich normally has bolt heads in stock:
https://www.gunpartscorp.com/g...tevspgfld/rifles-sav
 
Posts: 1162 | Location: California | Registered: November 03, 2012Reply With QuoteReport This Post
ole95

Picture of ole95
posted Hide Post
I got mine from Grizzly I was told it's made by PTG it stopped the primer flow problem I was having. it was a little stiff until I polished it up


Life's easier when your only average
IHMSA #57528
------------------------------
shoot like your life depends on it
 
Posts: 532 | Location: Alabama  | Registered: April 19, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 


© Specialty Pistols 2003 - 2021 All Rights Reserved.
All Material Contained Here Is Protected And May NOT Be Reproduced,
Copied or Distributed, in any form, Without Written Permission.
"Specialty Pistols", "Specialty Pistols Bulletin Board" and
"Specialty Pistol Gear" are Trademarks of
Accurate Arms & Ammo, LLC.